#Change language corel draw 2018 pdf#
#Change language corel draw 2018 upgrade#
#Change language corel draw 2018 plus#
#Change language corel draw 2018 series#

In CJV300/150 series, each line can be cut when performing continuous register cut.But if the data is copied, each line can NOT be cut.

Enlarge the area to paint in red around the register mark to prevent occurring the register mark detection error.(Only for the model which has register detection function excluding CF3.).

(Only for CFL-605RT)To improve the operability of reverse cut, change the UI and specification of reverse cut.

In CFL-605RT, the reverse cut function is improved.

When executing printed & cut with RL output, squire pass around the date is printed.

When using a data which the length is more than 15,400mm, CorelDRAW freezes when displaying plot dialog.

To perform separately frame cut and reverse cut in two processes, separated operation of frame and data cutting can be performed at separate timing.

Improved the operability of Reverse Cut (Only for CFL-605RT FWVer.1.40 and laterпј‰ДЇirst, perform all frame cut at obverse, and continuously perform data cut at reverse.

Register color/layer of cutting condition as a favorite eachДЄfter registering cutting condition and cutting order which is setting each color and layer as a favorite, apply the favorite, cutting condition and cutting order can be operated simply even though data is changed.

(The defect is occurred only CorelDRAW X7.)Д¬utting direction can be changed after checking cutting direction at CorelDRAW and click pass.

Function of FineCut8 is invalid when clicking the function menu button.

CorelDRAW X8(32/64bit) is now supported.

Tool can be set by tool name in addition to current pen number from No1 to No 6.

Tool name of output condition can be set пј€Only for CFL-605RT FW Ver1.50 or laterпј‰.

Outer and inner frames are simultaneously extracted using the frame extraction function.

CorelDRAW 2017(32/64bit) is now supported.

#Change language corel draw 2018 plus#

RasterLink 6 Plus ver1.2 or higher, and CuttingLink ver 1.0 or higher are required.

Then, detect the register marks with the cutting plotter.

To do the ID cut, set the cutting condition with FineCut first and output the ID cut data.ДЄnd print register marks with the given ID with RasterLinkPlus. When a printer prints data with ID and a cutting plotter detects the ID, it can cut automatically by the function.

Print data format can be selected and outputted from EPS / PDF.

#Change language corel draw 2018 pdf#

PDF is added to ID cut output format (print data).

#Change language corel draw 2018 series#

Mimaki UCJV300/150 series is now supported.

When outputting ID cut after expanding / decreasing in size, the cut shifts incorrectly.

For CrelDRAW X7, Tips of FineCut menu icon was displayed in French even it had to be in German.(Corel only).

In CF22-1225, favorites could not be registered and applied normally.

When doing ID cutting the data containing stroke width, the printing shifted.(Corel only).

When recognizing register marks, head withdrawal function can be now used after cutting.

In CF22-1225, RasterLink output can be now used.

When trying to detect a register mark in the direction that is not a separation direction at using intermediate register mark, it did not work properly.

Mark separation function has been supported in CF22-1225.

ID cut has bee supported in CFL-605 RT.

You can use it by applying CFL-605 RT FW Ver 1.70.

In CFL-605 RT, square register marks can be created and confirmed.

CorelDRAW TechinicalSuite 2018 is supported.

CorelDRAW GraphicsSuite 2018 is supported.

#Change language corel draw 2018 upgrade#

This Upgrade software requests older version of Mimaki FineCut CD-ROM while installation. FineCut8 for CorelDRAW Ver8.7.6 Upgrade(64-Bit) TypeД¬orelDRAWВ® Graphics Suite X6/X7/X8/2017/2018 64-BitД®nglish/German/Italian/French/Portuguese/Spanish/Russian/Simplified Chinese/Traditional ChineseД¬orelDRAWВ® Technical Suite X6/X7/2017/2018 64-BitД®nglish/German(X7 or later)/French(X7 or later)